The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal, chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on, with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
Loose material conveyor belt conveyor system in the electronic belt scale, is a dynamic scale, its accuracy will be affected by various factors inside and outside, resulting in the measurement of materials are not allowed. In order to ensure the accuracy of the belt scale in use, the establishment of a set of material calibration device, regular belt scale calibration is very necessary.
Electric type weight hoist, reliable, stable, simple and reasonable transmission, to ensure the correctness of the sensor admissions, and can be easily connected with the PLG programmable controller, according to the program to complete the self-given process, and can achieve Logical interlocking. The device is currently in the leading position in the country.
OUR WORKSHOP
OUR SALES TEAM
Type | Thrust KN |
Speed mm/s |
Motor |
Stroke mm |
A | B | C | D | E | K | H | I | L | L1 | Lc | φ1 | φ2 | φ3 | φe | φf |
Weight kg |
|||
L | M | H | Type |
Power KW |
||||||||||||||||||||
I | 0.6 | 30 | JW5024 | 0.06 | 100~500 | 30 | 40 | 20 | 40 | 100 | 228 | 130 | 20 | 465+S | 195 | 250+S | 95 | 130 | 63.5 | 14 | 25 | 20~35 | ||
1 | 34 | 43 | A27114 | 0.25 | 100~800 | 542+S | 277 | 126 | ||||||||||||||||
65 | A27124 | 0.37 | ||||||||||||||||||||||
3 | 34 | A27124 | 0.37 | |||||||||||||||||||||
43 | 65 | Y801-4 | 0.55 | 150 | ||||||||||||||||||||
5 | 50 | 60 | Y802-4 | 0.75 | 100~1000 | 40 | 50 | 25 | 50 | 114 | 280 | 150 | 25 | 598+S | 297 | 287+S | 165 | 170 | 80 | 20 | 35 | 50~80 | ||
100 | Y802-2 | 1.1 | ||||||||||||||||||||||
7 | 50 | 60 | Y90S-4 | 1.1 | 630+S | 330 | 196 | |||||||||||||||||
100 | Y90S-2 | 1.5 | ||||||||||||||||||||||
10 | 50 | Y90S-4 | 1.1 | 60 | 60 | |||||||||||||||||||
60 | Y90L-4 | 1.5 | 710+S | 410 | ||||||||||||||||||||
100 | Y90L-2 | 2.2 |
Loose material conveyor belt conveyor system in the electronic belt scale, is a dynamic scale, its accuracy will be affected by various factors inside and outside, resulting in the measurement of materials are not allowed. In order to ensure the accuracy of the belt scale in use, the establishment of a set of material calibration device, regular belt scale calibration is very necessary.
Electric type weight hoist, reliable, stable, simple and reasonable transmission, to ensure the correctness of the sensor admissions, and can be easily connected with the PLG programmable controller, according to the program to complete the self-given process, and can achieve Logical interlocking. The device is currently in the leading position in the country.
OUR WORKSHOP
OUR SALES TEAM